Concrete Sealers Catalogue

Typical uses for Ducan Water Based Concrete Sealer & Glaze would include the following:

  • Concrete Driveways (exposed or unexposed aggregate)
  • Concrete Patios and Walkways
  • Paving Stones and Interlocking Bricks
  • Stacking Concrete Landscape Blocks
  • Flagstone and Slate

View technical information

Concrete Sealer - Water Based - 1 gallon Part No. 180-10104

Description: A 100% acrylic water based Concrete Sealer that dries water clear. Penetrates, binds and hardens primarily for concrete surfaces. VOC compliant with the Canadian Clean Air Act and U.S. EPA concentration limits.

Features: Strengthens top layer, prevents spalling, stain resistant barrier, prevents premature aging, hard wearing, prevents efflorescence, non-yellowing. Is a dust proofing. Applies milky for easier application coverage.

Uses: Surface protector for concrete driveways, exposed aggregate driveways, concrete patios, concrete warehouse floors, interlocking pavers, concrete blocks, bricks, stucco.

NOTE: Spread rate 125 to 250 sq ft per 1 Gal - depending on surface porosity.

Concrete Sealer - Water Based - 3 gallon Part No. 180-10111

Description:  A 100% acrylic water based Concrete Sealer that dries water clear. Penetrates, binds and hardens primarily for concrete surfaces. VOC compliant with the Canadian Clean Air Act and U.S. EPA concentration limits.

Features: Strengthens top layer, prevents spalling, stain resistant barrier, prevents premature aging, hard wearing, prevents efflorescence, non-yellowing. Is a dust proofing. Applies milky for easier application coverage.

Uses: Surface protector for concrete driveways, exposed aggregate driveways, concrete patios, concrete warehouse floors, interlocking pavers, concrete blocks, bricks, stucco.

NOTE: Spread rate 375 to 625 sq ft per 3 Gal - depending on surface porosity.

Concrete Glaze - Water Based - 1 gallon Part No. 180-10404

Description: A 100% acrylic water based Concrete Sealer that dries water clear. Penetrates, binds and hardens primarily for exposed aggregate and concrete surfaces. VOC compliant with the Canadian Clean Air Act and U.S. EPA concentration limits.

Features: High gloss, strengthens top layer, prevents spalling, stain resistant barrier, prevents premature aging, hard wearing, prevents efflorescence, non-yellowing. Applies milky for easier application coverage.

Uses: A high gloss surface protector for exposed aggregate driveways, concrete patios, blocks, bricks and stucco.

NOTE: Spread rate 120 to 200 sq ft per 1 Gallon (not suitable for smooth surfaces).

Concrete Glaze - Water Based - 3 gallon Part No. 180-10411

Description: A 100% acrylic water based Concrete Sealer that dries water clear. Penetrates, binds and hardens primarily for exposed aggregate and concrete surfaces. VOC compliant with the Canadian Clean Air Act and U.S. EPA concentration limits.

Features: High gloss, strengthens top layer, prevents spalling, stain resistant barrier, prevents premature aging, hard wearing, prevents efflorescence, non-yellowing. Applies milky for easier application coverage.

Uses: A high gloss surface protector for exposed aggregate driveways, concrete patios, blocks, bricks and stucco.

NOTE: Spread rate 350 to 500 sq ft per 3 Gallon (not suitable for smooth surfaces).

grip zone - 90 gram Part No. 175-12015

Description: A polypropylene powder that when mixed with paints or coatings produces a fine textured, slip resistant surface.

Features: Low density insoluble characteristics help reduce settling. GripZone stays suspended in liquid.

Uses: Walkways, stairs, garage floors, driveways, pool areas, patios, decks and any other surface where heavy traffic is generated.

NOTE: One 90 g pack per 1 Gallon can of paint or coating

grip zone - 225 gram Part No. 175-12013

Description: A polypropylene powder that when mixed with paints or coatings produces a fine textured, slip resistant surface.

Features: Low density insoluble characteristics help reduce settling. GripZone stays suspended in liquid.

Uses: Walkways, stairs, garage floors, driveways, pool areas, patios, decks and any other surface where heavy traffic is generated.

NOTE: One 225 g jar per 2.5 Gallon can of paint or coating


Technical Information

 

Water Based Satin Sealer

Ducan Concrete Driveway and Patio Sealer is a clear satin finish that provides an oil, water and stain resistant barrier for use on new or aged surfaces.

It contains a blend of water and acrylic resins that penetrate deep into porous materials.  The special blend actually strengthens the top layer, yet provides a barrier that is allowed to breathe, thus reducing spalling (from freeze/thaw) and efflorescence.

Ducan Concrete Driveway and Patio Sealer will be working long after the beading is gone, repelling and reducing oil, gas, antifreeze, de-ice salts, caustic and acidic chemicals, BBQ sauce, etc. from staining due to day to day use.  This will allow for easier clean up of stains, preventing premature aging and retaining that new look longer.

Will not harm asphalt, synthetic fibre, plastic or natural rubber.

Specifications
VOC: 100 grams per litre (0.83 lbs per gallon)
Odour: Mild ammonia odour
Solids: 12.5%
Packaged: 1 US Gal (3.78L), 3 US Gal (11.3L), 5 US Gal (18.9L), 55 US Gal (205 L drum)
Weight: 9 lb per 1 US Gal (3.78 L)
Composition: Acrylic water blend
Characteristics: Repellent, penetrant
Consistency: Thin milky blue liquid (dries clear)
Protection: yes (penetrant) for best protection apply 2 coats
Thinning: Water
Interior or Exterior: Both
Application method: Roller, brush, or suitable for spray equipment
Application Rate: 125 to 250 sq ft per 1 gallon depending on surface
375 to 625 sq ft per 3 gallon depending on surface
  Application rates are dependant on the porosity of the surface the sealer is being applied to.
Dry Touch Time: 2 hrs. @ 21°C (70°F)
Cure Time: 48 hrs. before traffic is permitted
Clean up: Use water to clean equipment
Storage & Handling: Keep containers tightly closed between uses.
Keep from freezing.
Shelf life: 1 year in original container

 

Water Based Hi-Gloss Glaze

Ducan Concrete Driveway and Patio Glaze is a special blend of acrylic resins and water that is a clear surface hardener and repellent that exhibits a hi- gloss, primarily for exposed aggregate concretes, concrete patios, blocks and stucco.

Ducan Concrete Driveway and Patio Glaze repels and resists staining from oil, gas, antifreeze, transmission fluid, etc. It resists chemical attack from de-ice salts, caustic and acidic chemicals. This will allow for easier clean up of stains, preventing premature aging and retaining that new look longer.

Will not harm asphalt, synthetic fibre, plastic or natural rubber.

Specifications
VOC: 100 grams per litre (0.83 lbs per gallon)
Odour: Mild ammonia odour
Solids: 25%
Packaged: 1 US Gal (3.78L), 3 US Gal (11.3L), 5 US Gal
(18.9L), 55 US Gal (205 L drum)
Weight: 9 lb per 1 US Gal (3.78 L)
Composition: Acrylic water blend
Characteristics: High gloss clear protector
Consistency: Thin milky blue liquid (dries clear)
Protection: yes (repellent) for best protection apply 2 coats
Thinning: Water
Interior or Exterior: Both
Application method: Roller, brush, or suitable for spray equipment
Application Rate: 120 to 200 sq ft per 1 gallon depending on surface
350 to 500 sq ft per 3 gallon depending on surface
  Application rates are dependant on the porosity of the surface the sealer is being applied to.
Cure Time: 48 hrs. before traffic is permitted
Clean up: Use water to clean equipment
Storage & Handling: Keep containers tightly closed between uses.
Keep from freezing.
Shelf life: 1 year in original container


 

GRIPZONE Slip Resistant Additive

GripZone Slip-Resistant Additive is specifically formulated for Ducan Concrete Glaze and Ducan Concrete Sealer but may be added to any paint or stain.

GripZone is a slip-resistant additive made from finely ground polymer material.

GripZone can be used to give traction to stairs, pool decks, patios, decks, walkways and driveways. It provides improved chemical and abrasion resistance and is more comfortable to bare feet than silica or sand additives.

PACKAGING
GripZone can be purchased in the following sizes:

  • 1/2 lb (225 g) container
  • 90 g bag

COVERAGE

  • up to 5 x 90 g bags per 5 gallon container
  • up to 2 1/2 x 90 g bags per 2.5 gallon container
  • up to 1 x 90 g bag per 1 gallon container

 

 

  • I can honestly recommend Ducan products and by doing it myself saved nearly $5000.00 on a 450 square foot deck! Steve Anthony, Okanagan Falls, BCread more »