Deck Coating Catalogue

Rubber Fill-It - 1 Qt	Part No. 175-20430
Description: A heavily bodied rubber putty compound for waterproofing and leveling T & G plywood joints, flashing and cant strip. Features: Waterproof, permanently flexible, paintable, easy to apply, unaffected by weather. Designed to shrink, no sanding required. Uses: As a joint, crack and hole filler and leveller. To be used on new plywood surfaces. NOTE: Spread rate 32 sq ft per quart or 1 sheet of plywood.
Rubber Fill-It - 1 Gal	Part No. 175-20434
Description: A heavily bodied rubber putty compound for waterproofing and leveling T & G plywood joints, flashing and cant strip. Features: Waterproof, permanently flexible, paintable, easy to apply, unaffected by weather. Designed to shrink, no sanding required. Uses: As a joint, crack and hole filler and leveller. To be used on new plywood surfaces. NOTE: Spread rate 128 sq ft per gallon or 4 sheets of plywood.
rOLL-DEK TEXTURED BASE COAT - 1 GAL	Part No. 160-50104
Description: 100% synthetic rubber coating made with a Neoprene* rubber dissolved in an aromatic solvent with rubber non-skid particles added. Features: Waterproof, long lasting, durable, permanent, flexible, non-skid, extreme cold flexibility, beautifies, easy to apply, hard wearing. Uses: Over 5/8" or 3/4" T & G plywood, concrete, fiberglass. As a base coat for decks, walkways, porches, balconies, roof, trailers, platforms, etc. NOTE: Spread rate 64 sq ft per 1 gallon, per coat. (Two coats are required.)
rOLL-DEK TEXTURED BASE COAT - 2.5 GAL	Part No. 160-50110
Description: 100% synthetic rubber coating made with a Neoprene* rubber dissolved in an aromatic solvent with rubber non-skid particles added. Features: Waterproof, long lasting, durable, permanent, flexible, non-skid, extreme cold flexibility, beautifies, easy to apply, hard wearing. Uses: Over 5/8" or 3/4" T & G plywood, concrete, fiberglass. As a base coat for decks, walkways, porches, balconies, roof, trailers, platforms, etc. NOTE: Spread rate 160 sq ft per 2.5 gallon, per coat. (Two coats are required.)
top cote DOVER grey - 1 gal	Part No. 160-51104
Description: 100% synthetic rubber coating made with Hypalon* rubber dissolved in an aromatic solvent. Features: Waterproof, long lasting, durable, permanent, flexible, extreme cold flexibility, beautifies, easy to apply. Uses: As the 3rd coat for the Roll-Dek system and the rejuvenator every 3 to 4 years. NOTE: Spread rate 80 sq ft per 1 gallon, per coat.
TOP-COTE DOVER GREY - 2.5 GAL	Part No. 160-51110
Description: 100% synthetic rubber coating made with Hypalon* rubber dissolved in an aromatic solvent. Features: Waterproof, long lasting, durable, permanent, flexible, extreme cold flexibility, beautifies, easy to apply. Uses: As the 3rd coat for the Roll-Dek system and the rejuvenator every 3 to 4 years. NOTE: Spread rate 200 sq ft per 2.5 gallon, per coat.

top cote SANDY beige - 1 gal

Part No. 160-51204

Description: 100% synthetic rubber coating made with Hypalon* rubber dissolved in an aromatic solvent.

Features: Waterproof, long lasting, durable, permanent, flexible, extreme cold flexibility, beautifies, easy to apply.

Uses: As the 3rd coat for the Roll-Dek system and the rejuvenator every 3 to 4 years.

NOTE: Spread rate 80 sq ft per 1 gallon, per coat.

TOP-COTE SANDY BEIGE - 2.5 GAL	Part No. 160-51210
Description: 100% synthetic rubber coating made with Hypalon* rubber dissolved in an aromatic solvent. Features: Waterproof, long lasting, durable, permanent, flexible, extreme cold flexibility, beautifies, easy to apply. Uses: As the 3rd coat for the Roll-Dek system and the rejuvenator every 3 to 4 years. NOTE: Spread rate 200 sq ft per 2.5 gallon, per coat.
Polyester tape - 200 ft roll	Part No. 175-70720
Description: A 2" wide, tight mesh polyester tape. Features: Light weight, easy to handle 2" wide by 200 foot rolls will cover approximately 400 sq ft of seam. Uses: For embedding into Rubber Fill-It to span and hide plywood joints and transitions from flashing and cant strip to the deck surface when applying the Roll-Dek system.
GALVANIZED METAL DRIP FLASHING - NON-RETURN - 6 ft	Part No. 170-70736
Description: 90 degree - 30 gauge galvanized metal flashing with a non-return drip edge. Features: Will not rust, oil can or warp, 6' length for easy handling and installation, protects plywood from rain and moisture, kicks water away allowing the fascia board to stay dry. 2" nailing flange. Uses: Nail down 1/4" off the fascia board around the outside perimeter of the deck.
GALVANIZED METAL CANT STRIP - 6 ft	Part No. 175-70737
Description: 45 degree - 30 gauge galvanized metal cant strip with a 1" nailing strip. Features: 1" wide nailing strip, will not rust, oil can or warp, 6' length for easy handling and installation. Uses: Allows for an easy transition of the vinyl from the deck surface to the attachment areas of the house were it can be caulked or brought up under the siding between the deck and wall. It allows water to flow off the wall onto and over the deck surface.
DUCA-FLEX CAULK - white - 300 mIL	Part No. 175-20438
Description: A heavily bodied waterproof rubber caulk. Features: Waterproof, permanently flexible, paintable, easy to apply, unaffected by weather. Uses: Caulking around posts and against the house. NOTE: Approximately 25 lineal feet per tube.
DUCA-FLEX CAULK - grey - 300 mIl	Part No. 175-20439
Description: A heavily bodied waterproof rubber caulk. Features: Waterproof, permanently flexible, paintable, easy to apply, unaffected by weather. Uses: Caulking around posts and against the house. NOTE: Approximately 25 lineal feet per tube.
DUCA-FLEX CAULK - Buff - 300 mIl	Part No. 175-20437
Description: A heavily bodied waterproof rubber caulk. Features: Waterproof, permanently flexible, paintable, easy to apply, unaffected by weather. Uses: Caulking around posts and against the house. NOTE: Approximately 25 lineal feet per tube.
the duke all purpose cleaner and degreaser	Part No. 175-30612
Description: A chemically activated, concentrated, all purpose cleaner and degreaser. Features: Bio-degradable, economical, buffered pH, pleasant clean odour, free rinsing, non-flammable, convenient 1.9 L size dilutes to make up to 40 litres. Uses: Ideally suited for cleaning and degreasing all around the house, yard, car, boats, RV's, sundecks, patios, concrete driveways, garden equipment, painted walls, fiberglass, aluminum and vinyl siding. NOTE: Must be diluted with water to activate.

^ back to top

I can honestly recommend Ducan products and by doing it myself saved nearly $5000.00 on a 450 square foot deck! Steve Anthony, Okanagan Falls, BCread more »