Specialty Coating Catalogue

VINYL RE-FRESH - TINT BASE - 1 GAL PART NO. 170-53304

Description: A blend of specialty water based resins to refresh faded vinyl sheet decking and make it more aesthetically pleasing.

Features: Tough and durable, U.V. resistant, easy to clean, satin finish. Excellent adhesion to most vinyl sheet decking. Tintable to six aesthetically pleasing Ducan colours or customize from the pastel chip selection in your retailers paint department.

Uses: A rejuvenator for faded vinyl sheet decking only.

NOTE: Spread rate 200 sq ft to 250 sq ft per 1 Gal, per coat. (Two coats are required on the initial application.)

Application Instructions

vinyl-DEK - LIGHT GREY - 1 GAL PART NO. 165-52104

Description: A blend of vinyl and acrylic resins that offer exceptional adhesion and water repellent features.

Features: High resin and solids content, excellent adhesion properties, water clean up, low odour, provides textured surface.

Uses: For use on previously painted acrylic latex deck coatings, masonry and fiberglass surfaces. NOT FOR USE ON NEW PLYWOOD. NOT FOR USE ON VINYL SHEET DECKING.

NOTE: Spread rate 29 sq ft to 36 sq ft per 1 Gal, per coat

VINYL-DEK - LIGHT GREY - 2.5 GAL PART NO. 165-52110

Description: A blend of vinyl and acrylic resins that offer exceptional adhesion and water repellent features.

Features: High resin and solids content, excellent adhesion properties, water clean up, low odour, provides textured surface.

Uses: For use on previously painted acrylic latex deck coatings, masonry and fiberglass surfaces. NOT FOR USE ON NEW PLYWOOD. NOT FOR USE ON VINYL SHEET DECKING.

NOTE: Spread rate 72 sq ft to 90 sq ft per 2.5 Gal, per coat

Application Instructions

VINYL-DEK - DESERT SAND - 1 GAL PART NO. 165-52204

Description: A blend of vinyl and acrylic resins that offer exceptional adhesion and water repellent features.

Features: High resin and solids content, excellent adhesion properties, water clean up, low odour, provides textured surface.

Uses: For use on previously painted acrylic latex deck coatings, masonry and fiberglass surfaces. NOT FOR USE ON NEW PLYWOOD. NOT FOR USE ON VINYL SHEET DECKING.

NOTE: Spread rate 29 sq ft to 36 sq ft per 1 Gal, per coat

VINYL-DEK - DESERT SAND - 2.5 GAL PART NO. 165-52210

Description: A blend of vinyl and acrylic resins that offer exceptional adhesion and water repellent features.

Features: High resin and solids content, excellent adhesion properties, water clean up, low odour, provides textured surface.

Uses: For use on previously painted acrylic latex deck coatings, masonry and fiberglass surfaces. NOT FOR USE ON NEW PLYWOOD. NOT FOR USE ON VINYL SHEET DECKING.

NOTE: Spread rate 72 sq ft to 90 sq ft per 2.5 Gal, per coat

Application Instructions

  • I can honestly recommend Ducan products and by doing it myself saved nearly $5000.00 on a 450 square foot deck! Steve Anthony, Okanagan Falls, BCread more »