Vinyl Decking Catalogue

Dek-Master® Components

Ducan has assembled all the components you will need to successfully install your new Dek-Master® waterproof vinyl deck. There are 3 thicknesses, 31.5 mil, 45 mil and 60 mil to choose from. All offer an attractive look and will give you years of low maintenance decking.

  • Dek-Master® 31.5 mil Vinyl - 10 yr to 12 yr rating
  • Dek-Master® 45 mil Pro-Series Vinyl - 12 yr to 15 yr rating
  • Dek-Master® 60 mil Pro-Series Vinyl - 20 yr plus rating

Dek-Master®  31.5 mil Vinyl - West Coast Grey Part No. 150-10075

Description:  A fully cured PVC vinyl material impregnated onto a polyester fabric backing.

Features: Waterproof, Long Lasting, Fade and Mildew Resistant, Non-Skid, Easy to Clean, Cool to the Touch, Easy to Install.

Uses:  Commonly used to waterproof Sundecks, Balconies, RV Roof Tops, Sun Rooms, Boats and Boathouses. Will adhere to Plywood, Metals, Fiberglass, Above Ground Concrete and Rubberized Coatings.

NOTE: 74" width - Sold by the linear foot - Roll length 150 lin ft - Can be cut to length.

Dek-Master®  31.5 mil Vinyl - Desert Beige Part No. 150-10076

Description:  A fully cured PVC vinyl material impregnated onto a polyester fabric backing.

Features: Waterproof, Long Lasting, Fade and Mildew Resistant, Non-Skid, Easy to Clean, Cool to the Touch, Easy to Install.

Uses:  Commonly used to waterproof Sundecks, Balconies, RV Roof Tops, Sun Rooms, Boats and Boathouses. Will adhere to Plywood, Metals, Fiberglass, Above Ground Concrete and Rubberized Coatings.

NOTE: 74" width - Sold by the linear foot - Roll length 150 lin ft - Can be cut to length.

Dek-Master®  31.5 mil Vinyl - Seafoam Part No. 150-10079

Description:  A fully cured PVC vinyl material impregnated onto a polyester fabric backing.

Features: Waterproof, Long Lasting, Fade and Mildew Resistant, Non-Skid, Easy to Clean, Cool to the Touch, Easy to Install.

Uses:  Commonly used to waterproof Sundecks, Balconies, RV Roof Tops, Sun Rooms, Boats and Boathouses. Will adhere to Plywood, Metals, Fiberglass, Above Ground Concrete and Rubberized Coatings.

NOTE: 74" width - Sold by the linear foot - Roll length 150 lin ft - Can be cut to length.

Dek-Master®  31.5 mil Vinyl - Brindle Taupe Part No. 150-10078

Description:  A fully cured PVC vinyl material impregnated onto a polyester fabric backing.

Features: Waterproof, Long Lasting, Fade and Mildew Resistant, Non-Skid, Easy to Clean, Cool to the Touch, Easy to Install.

Uses:  Commonly used to waterproof Sundecks, Balconies, RV Roof Tops, Sun Rooms, Boats and Boathouses. Will adhere to Plywood, Metals, Fiberglass, Above Ground Concrete and Rubberized Coatings.

NOTE: 74" width - Sold by the linear foot - Roll length 150 lin ft - Can be cut to length.

Dek-Master®  PRO-SERIES 45 mil Vinyl - MUSKOKA SHORE Part No. 150-10082

Description:  A fully cured PVC vinyl material impregnated onto a polyester fabric backing.

Features: Waterproof, Long Lasting, Fade and Mildew Resistant, Non-Skid, Easy to Clean, Cool to the Touch, Easy to Install.

Uses:  Commonly used to waterproof Sundecks, Balconies, RV Roof Tops, Sun Rooms, Boats and Boathouses. Will adhere to Plywood, Metals, Fiberglass, Above Ground Concrete and Rubberized Coatings.

NOTE: 74" width - Sold by the linear foot - Roll length 90 lin ft - Can be cut to length.

Dek-Master®  PRO-SERIES 45 mil Vinyl - Canyon Grey Part No. 150-10080

Description:  A fully cured PVC vinyl material impregnated onto a polyester fabric backing.

Features: Waterproof, Long Lasting, Fade and Mildew Resistant, Non-Skid, Easy to Clean, Cool to the Touch, Easy to Install.

Uses:  Commonly used to waterproof Sundecks, Balconies, RV Roof Tops, Sun Rooms, Boats and Boathouses. Will adhere to Plywood, Metals, Fiberglass, Above Ground Concrete and Rubberized Coatings.

NOTE: 74" width - Sold by the linear foot - Roll length 90 lin ft - Can be cut to length.

Dek-Master®  PRO-SERIES 45 mil Vinyl - FIELDSTONE Part No. 150-10081

Description:  A fully cured PVC vinyl material impregnated onto a polyester fabric backing.

Features: Waterproof, Long Lasting, Fade and Mildew Resistant, Non-Skid, Easy to Clean, Cool to the Touch, Easy to Install.

Uses:  Commonly used to waterproof Sundecks, Balconies, RV Roof Tops, Sun Rooms, Boats and Boathouses. Will adhere to Plywood, Metals, Fiberglass, Above Ground Concrete and Rubberized Coatings.

NOTE: 74" width - Sold by the linear foot - Roll length 90 lin ft - Can be cut to length.

Dek-Master®  PRO-SERIES 60 mil Vinyl - MUSKOKA SHORE Part No. 150-10097

Description:  A fully cured PVC vinyl material impregnated onto a polyester fabric backing.

Features: Waterproof, Long Lasting, Fade and Mildew Resistant, Non-Skid, Easy to Clean, Cool to the Touch, Easy to Install.

Uses:  Commonly used to waterproof Sundecks, Balconies, RV Roof Tops, Sun Rooms, Boats and Boathouses. Will adhere to Plywood, Metals, Fiberglass, Above Ground Concrete and Rubberized Coatings.

NOTE: 72" width - Sold by the linear foot - Roll length 75 lin ft - Can be cut to length.

Dek-Master®  PRO-SERIES 60 mil Vinyl - CANYON Grey Part No. 150-10094

Description:  A fully cured PVC vinyl material impregnated onto a polyester fabric backing.

Features: Waterproof, Long Lasting, Fade and Mildew Resistant, Non-Skid, Easy to Clean, Cool to the Touch, Easy to Install.

Uses:  Commonly used to waterproof Sundecks, Balconies, RV Roof Tops, Sun Rooms, Boats and Boathouses. Will adhere to Plywood, Metals, Fiberglass, Above Ground Concrete and Rubberized Coatings.

NOTE: 72" width - Sold by the linear foot - Roll length 75 lin ft - Can be cut to length.

Dek-Master®  PRO-SERIES 60 mil Vinyl - FIELDSTONE Part No. 150-10096

Description:  A fully cured PVC vinyl material impregnated onto a polyester fabric backing.

Features: Waterproof, Long Lasting, Fade and Mildew Resistant, Non-Skid, Easy to Clean, Cool to the Touch, Easy to Install.

Uses:  Commonly used to waterproof Sundecks, Balconies, RV Roof Tops, Sun Rooms, Boats and Boathouses. Will adhere to Plywood, Metals, Fiberglass, Above Ground Concrete and Rubberized Coatings.

NOTE: 72" width - Sold by the linear foot - Roll length 75 lin ft - Can be cut to length.

Dek-Patch Filler & Floor Levelling Compound - 2 lb Part No. 150-20101

Description: A modified cement based compound for filling and leveling T & G plywood joints, screw holes, transitions between wood and flashing or cant strip.

Features: Easy to apply, fast dry time, sandable, mixes easily with 2 parts Dek-Patch, 1 part water.

Uses: As a joint crack and hole filler and leveler. To be used on new plywood surfaces under Dek-Master® vinyls.

NOTE: Spread rate 64 sq ft per quart or 2 sheets of plywood.

Dek-Patch Filler & Floor Levelling Compound - 8 lb Part No. 150-20104

Description: A modified cement based compound for filling and leveling T & G plywood joints, screw holes, transition between wood and flashing or cant strip.

Features: Easy to apply, fast dry time, sandable, mixes easily with 2 parts Dek-Patch, 1 part water.

Uses: As a joint crack and hole filler and leveler. To be used on new plywood surfaces under Dek-Master® vinyls.

NOTE: Spread rate 264 sq ft per gallon or 8 sheets of plywood.

Dek-master® regular WATER-BASED adhesive - 1 gal Part No. 150-20204

Description: A water-based latex rubber adhesive specially formulated for laying 31.5 mil PVC vinyl floor coverings and carpets with many different backing. For use both outdoors and indoors. Apply with a short nap paint roller

Features: Waterproof, user friendly in extreme cold weather. Allows up to 1 hour of working time. Low odour. White, dries to clear.

Uses: Adhering Ducan Dek-Master® 31.5 mil vinyl in a temperature range of 15° C to 30° C (59F° to 86F°).

NOTE: 1 Gal will cover 64 sq ft of deck surface. (1 coat on back of vinyl and 1 on the wood)

dek-master® regular WATER-BASED adhesive - 3 gal Part No. 150-20211

Description: A water-based latex rubber adhesive specially formulated for laying 31.5 mil PVC vinyl floor coverings and carpets with many different backing. For use both outdoors and indoors. Apply with a short nap paint roller

Features: Waterproof, user friendly in extreme cold weather. Allows up to 1 hour of working time. Low odour. White, dries to clear.

Uses: Adhering Ducan Dek-Master® 31.5 mil vinyl in a temperature range of 15° C to 30° C (59F° to 86F°).

NOTE: 3 Gal will cover 192 sq ft of deck surface. (1 coat on back of vinyl and 1 on the wood)

Dek-Master® Low Temp Adhesive - 1 Gal Part No. 150-20604

Description: A solvent based neoprene adhesive especially formulated for exterior vinyl application with a low nap roller.

Features: Waterproof, flexible in extreme hot and cold weather. User friendly allowing up to 1 hour of working time (exterior use).

Uses: Adhering Ducan Dek-Master® 31.5 mil vinyl in temperature range of 8° C to 15° C.

NOTE: 1 Gal will cover 64 sq ft of deck surface. (1 coat on back of vinyl and 1 on the wood)

Dek-Master® Low Temp Adhesive - 2.5 Gal Part No. 150-20610

Description: A solvent based neoprene adhesive specially formulated for exterior vinyl application with a low nap paint roller.

Features: Waterproof, flexible in extreme hot and cold weather. User friendly allowing up to 1 hour of working time (exterior use).

Uses: Adhering Ducan Dek-Master® 31.5 mil vinyl in temperature range of 8° C to 15° C.

NOTE: 1 - 2.5 Gal will cover 160 sq ft of deck surface. (1 coat on back of vinyl and 1 on the wood)

Dek-Master® trim Adhesive - 1 QT Part No. 150-20611

Description: A solvent based neoprene adhesive especially formulated for exterior vinyl application with a low nap roller.

Features: Waterproof, flexible in extreme hot and cold weather. User friendly allowing up to 15 minutes working time (exterior use).

Uses: Adhering Ducan Dek-Master® 31.5 mil and 45 mil vinyls to metal trims in temperature range of 8° C to 32° C.

NOTE: 1 Qt will cover approximately 60 lin ft of metal trim.

DEK-MASTER® Overlap Cement - 8 fl oz Part No. 150-20525

Description: A PVC vinyl/acrylic blend solvent cement for sound waterproof Dek-Master® 31.5 mil vinyl overlap seams.

Features: Waterproof, non-yellowing, easy to apply and flexible in extreme cold.

Uses: To chemically weld and waterproof Dek-Master® 31.5 mil vinyl overlap seams, outside corners, inside corners. Do not use below 8° C

NOTE: 1 can will do approx. 25 linear feet of seam based on a 1 inch overlap.

Dek-Master® Pro-Series Exterior Contact adhesive - 5 Gal Part No. 150-20320

Description: A solvent based neoprene rubber contact adhesive especially formulated for exterior vinyl applications. Very fast tack time for use on 45 mil and 60 mil vinyls.

Features: Waterproof, flexible in extreme hot and cold weather. Extremely fast tack time (exterior use).

Uses: Adhering Dek-Master® 45 mil and 60 mil vinyls. Spread rate 46 sq ft per gallon.

NOTE: 5 Gal pail will cover 230 sq ft of deck surface. (1 coat on back of vinyl and 1 on wood)

Dek-Master® Pro-Series Exterior Contact adhesive - 1 Gal Part No. 150-20304

Description: A solvent based neoprene rubber contact adhesive especially formulated for exterior vinyl applications. Very fast tack time for use on 45 mil and 60 mil vinyls.

Features: Waterproof, flexible in extreme hot and cold weather. Extremely fast tack time (exterior use).

Uses: Adhering Dek-Master® 45 mil and 60 mil vinyls. Spread rate 46 sq ft.

NOTE: 1 Gal pail will cover 46 sq ft of deck surface. (1 coat on back of vinyl and 1 on wood)

Dek-Master® Wood deck drain assembly Part No. 175-WDD1

Description: The Deck Drain Assembly is designed for wood decks.

Features: Composed of 3 parts: the grate, the clamp collar and the drain body. It has a 6 1/2" deck opening with the 3 deck flange screws set at 7 3/4" diameter. The flange is 8" in diameter..

Uses: Designed for use on a plywood deck surface that is being covered with a vinyl membrane.

NOTE: Easy installation instructions included with each drain assembly.


  ^ back to top
  • I can honestly recommend Ducan products and by doing it myself saved nearly $5000.00 on a 450 square foot deck! Steve Anthony, Okanagan Falls, BCread more »