catalogue

Description: A modified cement based compound for filling and leveling T & G plywood joints, screw holes, transitions between wood and flashing or cant strip.

Features: Easy to apply, fast dry time, sandable, mixes easily with 2 parts Dek-Patch, 1 part water.

Uses: As a joint crack and hole filler and leveler. To be used on new plywood surfaces under Dek-Master® vinyls.

NOTE: Spread rate 64 sq ft per quart or 2 sheets of plywood.

Description: A modified cement based compound for filling and leveling T & G plywood joints, screw holes, transition between wood and flashing or cant strip.

Features: Easy to apply, fast dry time, sandable, mixes easily with 2 parts Dek-Patch, 1 part water.

Uses: As a joint crack and hole filler and leveler. To be used on new plywood surfaces under Dek-Master® vinyls.

NOTE: Spread rate 264 sq ft per gallon or 8 sheets of plywood.

Description: A solvent based neoprene rubber contact adhesive especially formulated for exterior vinyl applications. Very fast tack time for use on 45 mil and 60 mil vinyls.

Features: Waterproof, flexible in extreme hot and cold weather. Extremely fast tack time (exterior use).

Uses: Adhering Dek-Master® 45 mil and 60 mil vinyls. Spread rate 46 sq ft per gallon.

NOTE: 1 Gal pail will cover 46 sq ft of deck surface. (1 coat on back of vinyl and 1 on wood)

Description: A water based rubberized adhesive especially formulated for exterior vinyl applications. Fast tack time for use on 45 mil and 60 mil vinyls and other types of carpet and resilient tile.

Features: Waterproof, high rubber content, highly elastic with little shrinkage, water clean up, low odour & solvent free. Professional grade for exterior use.

Uses: Adhering Dek-Master® PRO 45 mil and 60 mil vinyls. Tack time approx 8 to 15 min (21°C/70°F).

NOTE: 5 Gal pail will cover 500 sq ft of deck surface. Apply with 1/8" V-notch trowel to deck surface only.

Description: A PVC vinyl/acrylic blend solvent cement for sound waterproof Dek-Master® 31.5 mil vinyl overlap seams.

Features: Waterproof, non-yellowing, easy to apply and flexible in extreme cold.

Uses: To chemically weld and waterproof Dek-Master® 31.5 mil vinyl overlap seams, outside corners, inside corners.

NOTE: 1 can will do approx. 25 linear feet of seam based on a 1 inch overlap.

Warning: Ducan highly recommends using Heat Welded overlap seams on 45 mil vinyl and cannot guarantee the results if Overlap Cement is used.

Description: A heavily bodied waterproof rubber caulking.

Features: Waterproof, permanently flexible, paintable, easy to apply, unaffected by weather.

Uses: Caulking around posts and against the house.

NOTE: Approx. 25 lin ft per tube.

Description: A heavily bodied waterproof rubber caulking.

Features: Waterproof, permanently flexible, paintable, easy to apply, unaffected by weather.

Uses: Caulking around posts and against the house.

NOTE: Approx. 25 lin ft per tube.

Description: A heavily bodied waterproof rubber caulking.

Features: Waterproof, permanently flexible, paintable, easy to apply, unaffected by weather.

Uses: Caulking around posts and against the house.

NOTE: Approx. 25 lin ft per tube.

Description: 90 degree - 30 gauge galvanized metal flashing with a non-return drip edge.

Features: Will not rust, oil can or warp, 6' length for easy handling and installation, protects plywood from rain and moisture, kicks water away allowing the fascia board to stay dry. 2" nailing flange.

Uses: Nail down 1/4" off the fascia board around the outside perimeter of the deck.

Description: 45 degree - 30 gauge galvanized metal cant strip with a 1" nailing strip.

Features: 1" wide nailing strip, will not rust, oil can or warp, 6' length for easy handling and installation.

Uses: Allows for an easy transition of the vinyl from the deck surface to the attachment areas of the house were it can be caulked or brought up under the siding between the deck and wall. It allows water to flow off the wall onto and over the deck surface.

Description: Flexable U-shaped plastic deck clip used to secure Dek-Master® vinyl to the flashing around the perimeter of the deck.

Features: Easy to install friction fit gives an attractive looking finished edge, convenient 6' length.

Uses: Clips over vinyl and flashing securing the vinyl, not allowing it to curl up off the edges.

Description: Flexable U-shaped plastic deck clip used to secure Dek-Master® vinyl to the flashing around the perimeter of the deck.

Features: Easy to install friction fit gives an attractive looking finished edge, convenient 6' length.

Uses: Clips over vinyl and flashing securing the vinyl, not allowing it to curl up off the edges.

Description: Flexable U-shaped plastic deck clip used to secure Dek-Master® vinyl to the flashing around the perimeter of the deck.

Features: Easy to install friction fit gives an attractive looking finished edge, convenient 6' length.

Uses: Clips over vinyl and flashing securing the vinyl, not allowing it to curl up off the edges.

Description: Roller suitable for applying solvent and water based adhesives.

Features: A flamed bonding process that embeds the fleece into the core. This allows the roller to perform with solvents without falling apart.

Uses: For applying adhesives to the deck surface as well as to the back side of the vinyl.

Description: A chemically activated, concentrated, all purpose cleaner and degreaser.

Features: Bio-degradable, economical, buffered pH, pleasant clean odour, free rinsing, non-flammable, convenient 1.9 L size dilutes to make up to 40 litres.

Uses: Ideally suited for cleaning and degreasing all around the house, yard, car, boats, RV's, Dek-Master® vinyls, sundecks, patios, concrete driveways, garden equipment, painted walls, fiberglass, aluminum and vinyl siding.

Note: Must be diluted with water to activate.